What’s going on?
In case you hadn’t noticed, Barron Square is getting a face lift. A major project to repair dry rot damage and repaint all the buildings began several weeks ago. You have probably seen the red marks on the walls, stairs and balconies of your building. These indicate areas of the siding/shingles and the trim which showed evidence of deterioration during the initial inspection and will be replaced. The work is being done by A.C. Enterprises under the supervision of Richard Avelar & Associates. The last time this work was done was in 2009.
You will receive several notices regarding your building, the last being 3 days prior to beginning of work. Please read the notice carefully. It may be necessary for you to remove personal items from your patios/decks. Planters and such may need to be moved in order to permit access for work.
The project began on at Building 1 on July 11th. Startup was slower than expected as the work crews familiarized themselves with the construction of our buildings and as additional areas needing repair were uncovered. Problems which are discovered and were not covered in the original scope of work in the contract will be evaluated on a case by case basis. We are hoping that all of the buildings can be completed this year before the rainy season (hopefully!) begins in November.
Paint colors
The Board decided to continue with the current paint colors because it was felt that they were best suited to the landscaping of our community. Another interesting reason was that we had insisted that any owner who had replaced their windows had to match the exterior color to the dark brown trim, so now we had to match the trim to the windows. One small change was made. A slightly more glossy finish was chosen for the trim in the hope that the additional reflectivity would decrease the sun fading of the darker brown color. Replacement shingles will be stained with a cedar tone to approximate the existing siding.
ALERT for Comcast cable users
If you have Comcast cable service you should know that when Comcast rewired our complex in 2010 we insisted that all cables be run in underground conduit and in covered cable track on the side walls of the buildings. No more unsightly half-buried cables to be cut by the gardeners or stapled to the side of the building. As a consequence of this, if your cable enters the building in a section of siding that needs to be replaced because of dry rot, it will be necessary to disconnect your cable.
We realize that for some subscribers this may interrupt television, internet and even telephone services. We will inspect your building prior to beginning construction and determine if any of the Comcast cables are located on an area of siding to be replaced. The contractor has agreed that this will be done in the most expeditious way to minimize any disruption of your services. If you can arrange to be at home when that area of siding needs to be removed, the contractor can enter your home and disconnect the cable from the wall plate and remove it from the wall. They will then replace the siding as quickly as possible and reconnect the cable. If you are not home the contractor will have to cut the cable on the outside, replace the siding and then splice your cable. In either case it should not affect the quality of service, but you may need to restart your TV control box and/or your internet modem to reinitialize your Comcast service.
NOTE: Comcast informed us that they will no longer supply the covered cable track but the Board has identified an alternate source of supply. If you decide to order new Comcast service or need to move your Comcast outlet to another location in your unit, please contact PML so that we can insure that the installation is done according to our architectural standards.